blueSky V2
Second-generation compact reverb pedal with plate, room and spring types, a dedicated Shimmer knob and a Mod switch. It suits guitarists, keyboard players and studio users who want stereo reverb with MIDI control and preset storage.
- Plate, room and spring reverb types
- Dedicated Shimmer knob with per-type pitch behaviour
- Mono/stereo input switch, dual TS outputs
- 300 MIDI presets via EXP/MIDI jack or USB-C
- True bypass (relay) or buffered bypass
- 24-bit/96kHz converters, 20Hz–20kHz response
Fotoattēli
8Sludinājumi
Šim modelim vēl nav sludinājumu
Kad kāds pārdos blueSky V2, sludinājumi un pārdošanas vēsture parādīsies šeit.
Pārdot tādu pašuApraksts
The pedal offers three reverb types: a vintage-style plate, a room that ranges from small spaces to arenas, and a spring recreation. Controls cover Mix, Decay, Pre-Delay, Low and High damping, and a Shimmer knob whose pitch behaviour depends on the reverb type: octave up on plate, octave plus a fifth on room, octave down with adjustable LFO speed on spring. A Mod switch selects light, deep or no modulation.
The input is a high-impedance Class A JFET stage with a rear switch for mono or stereo (TRS) sources, and there are two TS outputs for stereo use. Line-level mode adds 10dB of headroom for bass with active pickups, synths, effects loops and vocals. Bypass is relay-switched true bypass by default, with a buffered bypass option. Processing runs at 24-bit/96kHz on a 520MHz ARM processor.
The EXP/MIDI jack accepts an expression pedal, MiniSwitch, MultiSwitch Plus or MIDI, and the USB-C port handles MIDI and firmware updates. 300 MIDI preset locations are available, plus a footswitch-recalled Favorite preset. A power supply is not included.
Video
Specifikācijas
- Zīmols
- Strymon
- Modelis
- blueSky V2
- Kategorija
- Efekti un pedāļi
Inputs
- Audio input
- High impedance ultra low-noise discrete Class A JFET TRS stereo input
- Input impedance
- 1M Ohm
- Input mode switch
- Mono (TS) or Stereo (TRS)
- Line level mode
- 10dB added headroom
- Expression/MIDI input
- TRS jack for expression pedal, MiniSwitch, MultiSwitch Plus or TRS MIDI
Outputs
- Audio outputs
- Low impedance independent TS stereo outputs (Out L, Out R)
- Output impedance
- 100 Ohm
Connectivity
- USB
- USB-C for MIDI control and firmware updates
- MIDI presets
- 300 preset locations
- Footswitches
- Dedicated Favorite and On/Off
Audio
- Reverb types
- Plate, room, spring
- Converters
- 24-bit 96kHz A/D and D/A
- Processor
- 520MHz ARM Superscalar
- Processing
- 32-bit floating point
- Frequency response
- 20Hz to 20kHz
- Bypass
- Relay true bypass (default) or buffered bypass
Power
- Power requirement
- 9V DC, center negative, 300mA minimum
- Power supply
- Not included
Physical
- Dimensions
- 4.5" deep (11.43 cm) x 4" wide (10.16 cm) x 2.4" tall (6.1 cm)
- Chassis
- Anodized blue aluminum
- Origin
- Designed and built in the USA