RNR1
The RNR1 is an active ribbon microphone with a figure-8 pattern, designed with Rupert Neve. It pairs a 2.5 µm aluminium ribbon with two custom transformers and discrete circuitry, aimed at studio and stage use on vocals, instruments and drums.
- Active ribbon microphone with figure-8 polar pattern
- 2.5 µm hand-tensioned aluminium ribbon
- Two custom transformers designed by Rupert Neve
- 100 Hz low-cut filter
- Requires 48 V phantom power
- Includes custom shockmount, wooden box and metal case
Fotoattēli
7Sludinājumi
Šim modelim vēl nav sludinājumu
Kad kāds pārdos RNR1, sludinājumi un pārdošanas vēsture parādīsies šeit.
Pārdot tādu pašuApraksts
The RNR1 is a phantom-powered active ribbon microphone developed with Rupert Neve. Its 2.5 µm hand-tensioned aluminium ribbon sits between two custom transformers with a discrete circuit that keeps the high-frequency response extended, compensating for the roll-off typical of ribbon designs. It has a figure-8 pattern and a 20 Hz to 20 kHz frequency range.
The flat, scalloped matte-black chassis is machined to give the ribbon an acoustically suited fit. A switchable 100 Hz low-cut filter is included, along with gold-plated XLR connectors. The body is designed to sit centred in the supplied custom shockmount, which allows close placement on drums or in a concert hall setup.
The microphone connects through a 3-pin male XLR output and needs 48 V phantom power (P48, IEC 61938). It ships in a wooden box and a metal case with a thread adapter and user manual. Suggested applications include vocals, acoustic and electric guitar, strings, piano, woodwinds, brass, drums, overheads and room.
Video
Specifikācijas
- Zīmols
- sE Electronics
- Modelis
- RNR1
- Kategorija
- Studija › Mikrofoni
Transducer
- Transducer
- Handmade 2.5 µm aluminium ribbon
- Electronics
- Active
- Polar pattern
- Figure 8
Audio
- Frequency range
- 20 Hz - 20 kHz
- Sensitivity
- 25 mV/Pa (-32 dB)
- Max SPL
- 137 dB (0.5% THD at 1 kHz)
- Equivalent noise level
- 17 dB(A)
- Signal-to-noise ratio
- 77 dB
- Low-cut filter
- 100 Hz
- Electrical impedance
- 200 ohms
Connectivity
- Connector
- 3-pin male XLR
- Mating connector
- XLR3F
Power
- Power
- 48 V phantom power (P48 per IEC 61938)
Physical
- Diameter
- 47 mm (1.85 in)
- Length
- 268 mm (10.55 in)
- Weight
- 860 g (30.34 oz)
In the box
- Microphone
- RNR1
- Shockmount
- Custom shockmount
- Cases
- Wooden box and metal case
- Accessories
- Thread adapter
- Documentation
- User manual