JX44 V2
The JX44 V2 is a rackmount guitar, amp and effects signal manager that switches between four instrument inputs and four amp outputs. It is aimed at touring guitar techs who need silent switching, stereo FX routing and remote pedalboard or MIDI control.
- 4 instrument inputs and 4 amp outputs, switched silently
- Inactive inputs feed a buffered Tuner output
- Assignable stereo effects loop for wet/dry/wet setups
- Jensen transformers on amp outputs and DI output
- JR-5 footswitch jacks and 5-pin MIDI input for remote control
- Internal 120/240V power supply with IEC cable
Fotoattēli
8Sludinājumi
Šim modelim vēl nav sludinājumu
Kad kāds pārdos JX44 V2, sludinājumi un pārdošanas vēsture parādīsies šeit.
Pārdot tādu pašuApraksts
The JX44 V2 lets up to four guitars or wireless receivers be connected and active at once, and sends any inactive input to a buffered Tuner output so instruments can be tuned silently. Four amplifier outputs each pass through a Jensen transformer and have ground lift and 180-degree polarity reverse switches. Illuminated switches show the state of every input and output, and redundant front-panel input jacks allow quick changes.
A local stereo effects loop can be assigned to any amplifier output, which makes wet/dry/wet rigs possible. With the optional SGI line driver pair, a pedalboard can be placed up to 300 feet (100 m) away without signal loss. A Jensen-equipped Radial DI output provides a direct feed to the front-of-house mixer, for example from an acoustic instrument.
Switching can be done from the front panel, from two jacks for optional Radial JR-5 remote footswitches (one for guitar selection, one for amp selection), or from a MIDI controller over a 5-pin MIDI input. Connectors are gold-contact, and an internal 120/240V switching power supply with a swappable IEC cord suits international touring.
Video
Specifikācijas
- Zīmols
- Radial Engineering
- Modelis
- JX44 V2
- Kategorija
- Dzīvā skaņa › Cits dzīvajai skaņai
Inputs
- Instrument inputs
- 4
- Front-panel input jacks
- Redundant jacks for last-minute changes
- Remote footswitch inputs
- 2 (for Radial JR-5, guitar and amp switching)
- MIDI input
- 5-pin
Outputs
- Amp outputs
- 4 unbalanced, Jensen transformer-isolated
- Tuner output
- Buffered; fed by inactive inputs
- DI output
- Radial DI with Jensen transformer
- Effects loop
- Local stereo loop, assignable to any amp
Audio
- Ground lift
- Switch on amp outputs
- Polarity reverse
- 180° switch on amp outputs
- Switching
- Silent and immediate
- Transformers
- Jensen
Connectivity
- Connectors
- Gold-contact
- Remote pedalboard
- Optional SGI line driver (TX and RX), up to 300 ft (100 m)
- Remote control options
- Radial JR-5 footswitch or MIDI
Power
- Power supply
- Internal switching, 120/240V
- Power cable
- Swappable IEC cable
Physical
- Part number
- R800 6502 00
- Indicators
- Large illuminated input and output switches