QI LCR65RP
A 2 x 6.5-inch in-wall left/centre/right speaker with a 1-inch swivelling tweeter and a low-profile magnetic grille. It suits home cinema installs where a slim, flush fit is wanted and mounting depth is limited.
- 2 x 6.5" in-wall LCR speaker
- 1" swivel tweeter with switchable HF level
- Power handling 15 - 100W, 8 ohm nominal
- Sensitivity 87 dB (2.83V, 1m)
- Max rear depth 85 mm
- Magnetic low-profile grille
Fotoattēli
8Sludinājumi
Šim modelim vēl nav sludinājumu
Kad kāds pārdos QI LCR65RP, sludinājumi un pārdošanas vēsture parādīsies šeit.
Pārdot tādu pašuApraksts
The Q Install LCR 65RP is an in-wall speaker built for left, centre or right channel duty in home theatre systems. It uses two 6.5-inch low-frequency drivers with mass-damped polypropylene cones and high-powered coil and magnet assemblies, paired with a 1-inch silk dome tweeter protected by a mesh.
The tweeter swivels so the high-frequency direction can be adjusted, and a switchable high-frequency level setting allows further tuning to the room. High-order crossovers are used for a smooth transition between drivers, with the mid-range tuned to keep speech clear. The unit needs only a shallow mounting depth of 85 mm, and the low-profile grille attaches magnetically.
It is a passive speaker with a nominal 8 ohm impedance and 15-100 W program power handling, so it needs an A/V receiver or power amplifier. It belongs to the Q Install in-wall range, which also includes 8-inch and 6.5-inch two-way units and a passive 8-inch subwoofer for extra bass.
Specifikācijas
- Zīmols
- Q Acoustics
- Modelis
- QI LCR65RP
- Kategorija
- Hi-Fi un mājas audio › Skaļruņi
Audio
- Configuration
- 2 x 6.5" in-wall LCR speaker
- Tweeter type / diameter
- Swivel / 1" (25mm)
- Woofer diameter
- 6.5"
- Impedance (nominal)
- 8 ohms
- Sensitivity (2.83V, 1m)
- 87 dB SPL (switchable HF)
- Low frequency response (-3 dB)
- 65 Hz
- Power handling (program)
- 15 - 100W
Physical
- Max rear depth
- 85 mm
- Grille size (round / square)
- 511 mm x 221 mm
- Cutout (nominal)
- 483 mm x 193 mm
- Grille type
- Low-profile magnetic
- Mounting
- In-wall
Drivers
- Low frequency driver cone
- Nano Particle mass damped polypropylene
- Tweeter dome
- Silk, mesh protected
- Tweeter adjustment
- Swivel, with HF level adjustment
- Crossover
- High order