CI PA4-60
Four-channel power amplifier module for custom installation and distributed audio, delivering 60 W per channel into 8 ohms or 2 x 120 W in a two-channel mode. It uses DirectDigital amplification in a one-third-width 1U chassis and suits multi-room and home theatre installers.
- 4 x 60 W into 4/8 ohms, or 2 x 120 W in Dynamic Power Management mode
- DirectDigital amplification, THD+N 0.005%
- One-third-width 1U chassis with ChassisLink tool-free joining
- 2 x stereo RCA inputs with ±6 dB gain, plus stereo RCA pre-out
- 12 V trigger in and out; power button, trigger or signal-sense modes
- Universal 100-240 V AC input, snap-on speaker connectors
Fotoattēli
7Sludinājumi
Šim modelim vēl nav sludinājumu
Kad kāds pārdos CI PA4-60, sludinājumi un pārdošanas vēsture parādīsies šeit.
Pārdot tādu pašuApraksts
The CI PA4-60 is part of the NAD CI Modular Series. It has four independent amplifier channels rated at 60 W each into 4/8 ohms. A Dynamic Power Management mode combines them into a two-channel amplifier at 120 W per channel for zones that need more output. The amplifier is described as load invariant and is built on NAD's DirectDigital technology, which keeps heat generation low.
The chassis is one third of a rack width and 1U high, so up to 12 channels fit in a single rack unit. Modules are joined with the ChassisLink mounting system without tools and can be combined with other CI Modular products. Snap-on speaker connectors are supplied. Thermal design is efficient, and the power supply is universal.
Two stereo RCA line inputs each have a gain potentiometer and a stereo/mono setting. A stereo RCA pre-out allows looping to another amplifier. Power can be controlled by a power button, a 12 V trigger or signal sensing, and there is a 12 V trigger output for chaining. Status LEDs show power, active inputs and output or protection state.
Specifikācijas
- Zīmols
- NAD
- Modelis
- CI PA4-60
- Kategorija
- Hi-Fi un mājas audio › Pastiprinātāji
Audio
- Amplification
- DirectDigital™
- Rated power output
- Dynamic Power Management - 120W x 2 or 60W x 4 (8 Ohms)
- IHF dynamic power
- 300W (4ohm)/200w (8ohm)
- Signal-to-noise ratio
- -102dBA
- Distortion
- THD+N, 0.005%
Inputs
- Inputs
- 2 x Stereo RCA
- Input gain control
- x2 Input Gain Potentiometers (-6 to +6 dB range)
- Input control
- Input 1 Local/Global, x2 Input Stereo/Mono selection
- 12v trigger input
- x1 (Unit Power On)
Outputs
- Outputs
- 1 x Stereo RCA Pre-Out, 2 x Speaker outputs
- Speaker terminals
- 2x 4-PIN Snap On PHX 5.08mm Connector (Supports up to 12 AWG)
- 12v trigger output
- x1
Controls and indicators
- Power mode control
- 3-way switch (Power Button, 12v Trigger, Signal Sense options)
- Status indicator
- Power Status LED
- Source status indicator
- x2, Connected Input Active
- Output status indicator
- x2, Output pair 1, Output Pair 2 (Output active, Temperature/Protection warning)
Power
- Power supply
- Universal 2-pin AC cord input (100-240AC)
Physical
- Finish
- Black
- Dimensions (product)
- 146.5 x 44 x 384 mm (WxHxD)
- Weight (excluding rack ears & connectors)
- 2.35 kg/5.18 lbs
- Operating environment
- 0°C to 40°C
- Storage environment
- -10°C to 50°C, 20% to 80% relative humidity
In the box
- Included accessories
- 120V AC Power Cord
- Shipping dimensions (single unit)
- 520 x 228 x 140 mm (LxWxH)
- Shipping weight (single unit)
- 3.35 kg/7.4 lbs