534· Pastiprinātāji
Stereo power amplifier with a dual-monaural, fully balanced Pure Path design, rated at 250 W per channel into 8 ohms and 500 W into 4 ohms. Suited to hi-fi systems that pair it with a separate preamplifier and need network or custom-install control.
- 250 W/ch into 8 ohms, 500 W/ch into 4 ohms, 2-ohm stable
- Dual-monaural, fully balanced Pure Path discrete design
- Class A for most listening, class A/B at higher volumes
- Balanced and single-ended inputs
- Ethernet, RS-232, USB and 12 V trigger control
- Designed and handcrafted in the USA
Fotoattēli
8Sludinājumi
Šim modelim vēl nav sludinājumu
Kad kāds pārdos 534, sludinājumi un pārdošanas vēsture parādīsies šeit.
Pārdot tādu pašuApraksts
The № 534 is a dual-monaural stereo power amplifier built around a discrete, direct-coupled, fully differential signal path. It is rated at 250 W per channel into 8 ohms and 500 W into 4 ohms, stays stable into 2-ohm loads, and uses very little negative feedback. The output stage works in class A for most listening conditions and moves to class A/B at higher volumes.
Power comes from a shielded, encapsulated toroidal transformer. The gain stage uses a folded cascode arrangement of JFET and bipolar transistors, with tantalum nitride thin-film resistors and film capacitors in critical positions. The chassis is made of 6063-T5 extruded aluminum. The amplifier is designed and handcrafted in the USA.
Inputs are one balanced pair and one single-ended pair, so it works with most preamplifiers or sources with variable output. Speakers connect to four pairs of gold-plated Hurricane binding posts that accept standard or bi-wired cabling. Ethernet/IP, RS-232, USB and 12 V trigger in and out allow integration into control systems and web-based monitoring and configuration.
Video
Specifikācijas
- Zīmols
- Mark Levinson
- Modelis
- 534
- Kategorija
- Hi-Fi un mājas audio › Pastiprinātāji
Inputs
- Input connectors
- One pair balanced, one pair single-ended
- Input impedance
- 60 kΩ balanced; 30 kΩ unbalanced
- Voltage gain
- 26dB
- Input sensitivity
- 2.83VRMS output at 142mVRMS input
Outputs
- Speaker connectors
- Four pairs of Hurricane loudspeaker outputs, banana-plug sockets per channel, except on 230 VAC version
Audio
- Rated output power (8 Ω)
- 250 wpc RMS @ 8Ω, 20Hz to 20kHz @ <0.3% THD, full output from 2.83VRMS
- Rated output power (4 Ω)
- 500 wpc into 4 ohms
- Load stability
- 2-ohm stability
- Frequency response
- 10Hz to 20kHz ±0.2dB
- Signal-to-noise ratio
- >85dB, reference level 2.83 VRMS
- Operating class
- Class A for most listening conditions, class A/B at higher volumes
Connectivity
- Control I/O
- Ethernet, RS-232, Trigger In and Out, USB-A, Mini USB
- System integration
- Ethernet, IP, RS-232, triggers, web monitoring and control
Power
- Power requirements
- 100V~, 120V~, 230V~, factory set for destination country, 1500W
Physical
- Height (with feet)
- 7.75” (19.7cm)
- Height (without feet)
- 7” (17.8cm)
- Width
- 17.75” (45.1cm)
- Depth
- 20” (50.8cm)
- Net weight
- 107 lbs (48.5kg)
- Shipping weight
- 124 lbs (56.3kg)
- Chassis
- 6000-series aluminum chassis (6063-T5 extruded aluminum)