AirMon UHF
Wireless in-ear monitoring system with a transmitter and a bodypack receiver working in the 627–667 MHz UHF band. It suits musicians, DJs, tour guides and teams who need low-latency audio for one or many listeners.
- 627–667 MHz UHF, 40 selectable channels
- Uncompressed stereo at selectable 48 kHz or 96 kHz
- Latency around 9 ms
- Unlimited receivers per transmitter
- Rechargeable batteries, about 6 hours, USB-C charging
- Includes Scan 10 in-ear monitors and Y charging cable
Fotoattēli
5Sludinājumi
Šim modelim vēl nav sludinājumu
Kad kāds pārdos AirMon UHF, sludinājumi un pārdošanas vēsture parādīsies šeit.
Pārdot tādu pašuApraksts
The AirMon UHF sends stereo audio from a compact transmitter to a bodypack receiver over UHF, using uncompressed digital transmission at a selectable 48 kHz or 96 kHz sample rate. An illuminated toggle switch changes the rate, and latency is stated at around 9 ms. Pairing is automatic and usually takes one to two seconds.
Any number of receivers can be paired with one transmitter, and a receiver can also work with up to three nearby transmitters. That makes the system usable for multi-performer monitoring, silent events, group tours and shared studio reference listening. The transmitter has 40 selectable channels in the 627–667 MHz range.
Both units have built-in rechargeable lithium batteries charged over USB Type-C, with roughly 6 hours of use per charge. The transmitter takes a line source through a 3.5 mm cable, and the receiver has a 3.5 mm headphone output suited to most in-ear monitors or headphones. The set includes Scan 10 in-ear monitors, detachable antennas and a belt clip.
Video
Specifikācijas
- Zīmols
- iCON
- Modelis
- AirMon UHF
- Kategorija
- Dzīvā skaņa › Bezvadu sistēmas
Audio – Transmitter
- Sampling bit rate
- 24bit
- Channel mode
- STEREO
- Input level
- 0dBV
- Input impedance
- 10K ohm
Audio – Receiver
- Sampling bit rate
- 24bit
- Channel mode
- STEREO
- Output level
- 792mW
- Output impedance
- 32 ohm
Radio Frequency – Transmitter
- Operating frequency
- 627MHz-667MHz
- Digital modulation
- GFSK
- Occupied bandwidth
- 1.5MHz
- Transmission output
- 15dBm
- Selectable channel
- 40 channel
Radio Frequency – Receiver
- Operating frequency
- 627MHz-667MHz
- Digital modulation
- GFSK
- Occupied bandwidth
- 1.5MHz
- Receiving sensitivity
- -90dBm
Power – Transmitter
- Current consumption
- 140mA
- Power requirements
- Built-in rechargeable LiPo battery charged via USB 5V, 0.5A
- Battery operating time
- 6Hrs (approx)
Power – Receiver
- Current consumption
- 110mA
- Power requirements
- Built-in rechargeable LiPo battery charged via USB 5V, 0.5A
- Battery operating time
- 6Hrs (approx)
Physical – Transmitter
- Dimensions (WxDxH)
- 53x71x21mm (2.1"x2.8"x0.8")
- Weight
- 78.6g
Physical – Receiver
- Dimensions (WxDxH)
- 44x61x21mm (1.7"x2.4"x0.8")
- Weight
- 41g
In the box
- Receiver
- AirMon UHF Receiver x 1
- Transmitter
- AirMon UHF Transmitter x 1
- In-ear monitors
- Scan 10 In Ear Monitors
- Belt clip
- Included, affixed to the receiver
- Charging cable
- Y cable for charging both devices (USB C x 2 to USB 2.00)
- Audio cable
- 3.5 mm to 3.5 mm cable for connecting external sound sources to the transmitter
- Documentation
- Quickstart Guide