Bellows Legacy Reissue
EarthQuaker Devices Vairs netiek pārdots

Bellows Legacy Reissue

Bellows Legacy Reissue is a compact two-knob fuzz and overdrive pedal that covers ground from amp-style breakup to blown-out fuzz, aimed at guitarists after a vintage, tweed-like tone. It is a true-bypass pedal with relay-based switching, built by hand in Akron, Ohio.

  • Two controls: Level and Drive
  • Amp-like break-up through to blown-out fuzz
  • True bypass with electronic relay-based switching
  • 9 V DC, 2.1 mm negative-center barrel, 13 mA
  • Input impedance 250 kΩ, output impedance under 1 kΩ
  • Limited lifetime warranty
Pārdot tādu pašu

Fotoattēli

8

Sludinājumi

Šim modelim vēl nav sludinājumu

Kad kāds pārdos Bellows Legacy Reissue, sludinājumi un pārdošanas vēsture parādīsies šeit.

Pārdot tādu pašu

Apraksts

Bellows Legacy Reissue is a small fuzz driver with just two controls, Level and Drive. Drive sets how hard the signal hits the input, much like the volume knob of a non-master-volume amp. Lower settings give a wider, grittier, amp-like break-up, and turning it up gradually moves through a range of distorted tones into fully saturated fuzz. Counterclockwise the sound is thinner and cleaner, and clockwise it becomes thicker with more growl.

Level sets the output volume by adjusting the bias voltage of the transistor. A small amount of noise while setting it is described as normal.

The pedal is true bypass and uses electronic relay-based switching, so no audio passes unless it is powered. It runs from a standard 9 V DC supply with a 2.1 mm negative-center barrel plug and must not be run at higher voltages. Artwork is by Geoffrey Crowe, and the unit carries a limited lifetime warranty.

Video

Specifikācijas

Zīmols
EarthQuaker Devices
Modelis
Bellows Legacy Reissue
Kategorija
Efekti un pedāļi

Controls

Level
Adjusts output level by setting the transistor bias voltage
Drive
Controls input gain for different levels of dirt
Number of knobs
2

Audio

Effect type
Fuzz driver
Input impedance
250 kΩ
Output impedance
<1 kΩ
Bypass type
True bypass, electronic relay-based switching

Power

Supply voltage
9 V DC
Connector
2.1 mm barrel, negative center
Current draw
13 mA
Audio without power
Does not pass

Physical

Dimensions
1.50 × 3.75 × 2.00 in. (38 × 95 × 51 mm) with knobs
Artwork
Geoffrey Crowe
Made in
Akron, Ohio, USA

Warranty

Warranty
Limited lifetime warranty
Documentation
Operation manual available for download

Dati: earthquakerdevices.com; foto: EarthQuaker Devices product page · atjaunināts 2026-10-13 · Atradi kļūdu? Raksti mums