HTM71 S3
A three-way center-channel speaker from the 700 Series S3 range, with a decoupled Carbon Dome tweeter on top, a Continuum cone midrange and twin Aerofoil bass cones. Intended for home theatre systems built around the 705 S3, 703 S3 and 702 S3.
- 3-way vented-box center-channel speaker
- 25 mm decoupled Carbon Dome tweeter, Tweeter-on-Top
- 130 mm Continuum cone FST midrange
- Twin 130 mm Aerofoil Profile bass cones
- Sensitivity 89 dB; 8 Ω nominal impedance
- Gloss Black, Satin White or Mocha finish
Fotoattēli
8Sludinājumi
Šim modelim vēl nav sludinājumu
Kad kāds pārdos HTM71 S3, sludinājumi un pārdošanas vēsture parādīsies šeit.
Pārdot tādu pašuApraksts
The HTM71 S3 is a vented-box center-channel loudspeaker with a three-way layout. A 25 mm decoupled Carbon Dome tweeter sits in a Solid Body Tweeter-on-Top housing milled from a single block of aluminum. A dedicated 130 mm Continuum cone FST midrange handles voices and dialogue, while two 130 mm Aerofoil Profile bass cones cover the low end, assisted by a Flowport.
The tweeter housing uses a longer tube-loading system and decoupling to limit resonance. The Carbon Dome raises the tweeter breakup threshold to 47 kHz. The midrange uses the Continuum cone, FST, Biomimetic Suspension and decoupling from the bass drivers. The Tweeter-on-Top design is meant to match other 700 Series models in a surround setup.
The speaker is a passive model connected to an external amplifier or AV receiver through its speaker terminals. It has a nominal impedance of 8 Ω and works with amplifiers rated 30 W to 200 W into 8 Ω. It comes in Gloss Black, Satin White or Mocha, with a choice of grille colors.
Video
Specifikācijas
- Zīmols
- Bowers & Wilkins
- Modelis
- HTM71 S3
- Kategorija
- Hi-Fi un mājas audio › Skaļruņi
Drive units
- High-frequency driver
- 1x ø25mm (1 in) Decoupled Carbon Dome
- Midrange driver
- 1x ø130mm (5 in) Continuum cone FST
- Bass drivers
- 2x ø130mm (5 in) Aerofoil Profile
- Enclosure design
- 3-way vented-box system
Audio
- Frequency range
- 45Hz and 33kHz
- Frequency response
- 50Hz - 28kHz ±3dB
- Harmonic distortion
- 2nd and 3rd harmonics (90dB, 1m on axis)
- Sensitivity
- 89dB spl (2.83Vrms, 1m)
- Nominal impedance
- 8Ω (minimum 3.1Ω)
- Recommended amplifier power
- 30W - 200W into 8Ω on unclipped programme
- Max recommended cable impedance
- 0.1Ω
Technical features
- Tweeter
- Decoupled Carbon Dome tweeter
- Tweeter housing
- Solid Body Tweeter-on-Top
- Midrange
- Continuum™ cone FST™ midrange
- Bass cones
- Aerofoil™ Profile bass cones
- Port
- Flowport™
Physical
- Net weight
- 17.45kg (38.5 lb)
- Height
- 165 mm (6.5 in) cabinet only; 233 mm (9.2 in) including tweeter
- Width
- 628 mm (24.7 in) cabinet only
- Depth
- 318 mm (12.5 in) cabinet only; 356 mm (14.0 in) including grille and terminals
Finishes
- Cabinet finishes
- Gloss Black, Satin White, Mocha
- Grille finishes
- Black; Grey (Satin White only)