Allen & Heath DX164-W
Wall-mountable 16-input, 4-output audio expander that adds remote I/O to dLive, Avantis or SQ mixers and AHM matrix processors. It suits fixed installs and stage points where stage boxes need to sit far from the mixer.
- 16 mic preamps with up to +60 dB gain and -20 dB pad
- 4 balanced, relay-protected XLR line outputs
- 96 kHz audio over a single Cat5e cable, up to 100 m
- Redundant and cascade modes; up to 2 DX expanders per DX port
- Works with dLive, Avantis, SQ and AHM processors
Fotoattēli
5Sludinājumi
Šim modelim vēl nav sludinājumu
Kad kāds pārdos Allen & Heath DX164-W, sludinājumi un pārdošanas vēsture parādīsies šeit.
Pārdot tādu pašuApraksts
The DX164-W provides sixteen mic preamps and four line outputs in a wall-mount enclosure. Each preamp offers up to 60 dB of gain, a -20 dB pad for line-level sources and a phantom power indicator. The four outputs are balanced XLR line outs with relay protection. Audio runs at 96 kHz.
It links to the host over a single Cat5e cable and can sit up to 100 m from the mixer. A secure EtherCon port handles the connection to the mixer or an upstream DX expander, and a second locking EtherCon port is used either for a redundant link to compatible hardware or to daisy-chain a downstream expander. In cascade mode up to two DX expanders can be chained on each DX port.
No setup is needed: it is detected when connected, and the mixer takes care of firmware updates. A reversible mounting frame allows in-wall or on-wall fitting, and custom brackets allow a standard NEMA box or a floor pocket. For fixed installs the IEC mains inlet can be swapped for a gland module with screw terminals, and a 12 V DC backup input is included.
Specifikācijas
- Zīmols
- Allen & Heath
- Modelis
- DX164-W
- Kategorija
- Dzīvā skaņa › PA skaļruņi
Inputs
- Mic preamps
- 16
- Preamp gain
- +60 dB
- Pad
- -20 dB for line level sources
- Phantom power
- Indicators provided
Outputs
- Line outputs
- 4
- Output type
- Balanced, relay protected, XLR
Audio
- Sample rate
- 96 kHz
- Channel count
- 16 in / 4 out
Connectivity
- Host connection
- Single Cat5e cable via secure EtherCon port
- Second port
- Locking EtherCon for redundant connection or daisy-chaining
- Maximum cable distance
- 100 m from mixer
- Redundant mode
- Dual-cable connection to compatible hardware
- Cascade mode
- Up to 2 DX Expanders on each DX port
- Compatible with
- dLive, Avantis, SQ mixers and AHM audio matrix processors
Power
- Mains input
- IEC inlet, replaceable with gland module and screw terminals
- Backup input
- DC 12 V
Physical
- Mounting
- Reversible frame for in-wall or on-wall mounting
- Optional mounting
- Custom brackets for standard NEMA box or floor pocket
Software
- Configuration
- Plug-and-play, none required
- Firmware updates
- Handled automatically by the mixer