Blues Cube Tour
100-watt solid-state guitar amplifier head that models the behaviour of a tweed-era tube amp, with Clean and Crunch channels, a four-step power control and USB recording. Aimed at gigging and recording guitarists who want tube-style response at different volumes.
- 100 W head with Tube Logic tube-amp behaviour
- Clean and Crunch channels plus Dual Tone blend mode
- Power Control: 0.5 W, 15 W, 45 W, Max
- Reverb and two effects loops
- XLR and 1/4-inch line out, headphones, USB recording
- Weighs 8.0 kg
Fotoattēli
8Sludinājumi
Šim modelim vēl nav sludinājumu
Kad kāds pārdos Blues Cube Tour, sludinājumi un pārdošanas vēsture parādīsies šeit.
Pārdot tādu pašuApraksts
The Blues Cube Tour is a 100 W guitar head built on Roland's Tube Logic design, which reproduces how a vintage tube amp reacts from input to speaker output, including preamp and output-stage distortion and power-supply compression. It has no actual tubes and needs no tube replacement, and it is designed to be lighter than a tube amp of similar output.
There are two independent channels, Clean and Crunch, each with its own Boost and Tone switches and a three-band EQ. A Dual Tone mode blends both channels together. Master volume and Presence controls, onboard reverb and two effects loops complete the signal path. A four-position Power Control (0.5 W, 15 W, 45 W, Max) lets the amp be driven hard at lower volumes.
For recording and stage use the head offers balanced XLR and 1/4-inch line outs, a headphone jack and a USB output for direct capture to a computer. Footswitch jacks accept the optional GA-FC foot controller or BOSS FS-5L, FS-6 and FS-7 switches for channel, Dual Tone and loop control. The matching Blues Cube Cabinet410 is a separate 4x10 open-back cabinet with poplar construction, sold separately.
Video
Specifikācijas
- Zīmols
- Roland
- Modelis
- Blues Cube Tour
- Kategorija
- Dzīvā skaņa › Pastiprinātāji
Audio
- Rated power output
- 100 W
- Channels
- Clean, Crunch, Dual Tone blend
- Power control
- 0.5 W, 15 W, 45 W, MAX
- Speaker impedance select
- 4 ohm/8 ohm, 16 ohm
- Onboard effects
- Reverb
Inputs
- Nominal input level (INPUT HIGH)
- -10 dBu (1 M ohm)
- Nominal input level (INPUT LOW)
- 0 dBu
- Nominal input level (EFX LOOP A RETURN)
- -10 dBu
- Nominal input level (EFX LOOP B RETURN)
- -10 dBu
- Guitar input
- INPUT HIGH/LOW jack: 1/4-inch phone type
Controls
- Clean channel
- Boost button, Tone button, Volume, Bass, Middle, Treble
- Crunch channel
- Boost button, Tone button, Gain, Volume, Bass, Middle, Treble
- Effect
- EFX Loop A button, EFX Loop B button, Reverb knob
- Master section
- Presence, Master, Power Control switch
- Other switches
- Power, Dual Tone, CH Select, GND Lift, IMP. Select
Outputs
- Line out
- 1/4-inch phone type and XLR type
- Headphones
- PHONES jack: stereo 1/4-inch phone type
- Speaker out
- SPEAKER OUT jack
- Effects loop sends
- EFX Loop A SEND and B SEND, 1/4-inch phone type
Connectivity
- USB
- REC OUT port: USB type B
- Effects loop returns
- EFX Loop A RETURN and B RETURN, 1/4-inch phone type
- Foot switch (loops)
- TIP: EFX LOOP A, RING: EFX LOOP B, 1/4-inch TRS
- Foot switch (channel)
- TIP: CH SELECT, RING: DUAL TONE, 1/4-inch TRS
- Foot switch (GA-FC)
- 1/4-inch TRS phone type
- MIDI
- MIDI IN jack
Power
- Power consumption
- 108 W
- Power connection
- AC IN jack
Physical
- Width
- 545 mm (21-1/2 inches)
- Depth
- 233 mm (9-3/16 inches)
- Height
- 234 mm (9-1/4 inches)
- Weight
- 8.0 kg (17 lbs 11 oz)
In the box
- Included
- Owner's manual, power cord, speaker connection cable, GA-FC sticker
- Options (sold separately)
- BOSS FS-5L, FS-6, FS-7 footswitch; GA Foot Controller (GA-FC)