RØDE Wireless GO GEN 3
Compact dual-channel wireless microphone system with two transmitters and a receiver, built for content creators who record to cameras, smartphones or computers. It adds 32-bit float on-board recording and GainAssist level management.
- Two-channel 2.4 GHz digital system with 128-bit encryption
- Range up to 260 m line of sight
- 32-bit float on-board recording in each transmitter
- GainAssist automatic level balancing and camera presets
- Locking 3.5 mm lavalier connectors and headphone monitoring
- Bluetooth Direct Connect to iOS via RØDE Capture app
Fotoattēli
7Sludinājumi
Šim modelim vēl nav sludinājumu
Kad kāds pārdos RØDE Wireless GO GEN 3, sludinājumi un pārdošanas vēsture parādīsies šeit.
Pārdot tādu pašuApraksts
The Wireless GO (Gen 3) is a two-channel wireless system using a 2.4 GHz digital link with 128-bit encryption and a low-latency codec. Line-of-sight range reaches up to 260 m. Each transmitter records 32-bit float audio on board, so clipped or very quiet takes can be recovered in post-production.
GainAssist adjusts levels automatically, and the receiver also offers fine gain steps and camera-specific presets. The transmitters' built-in microphones use the same capsules and preamps as the Wireless PRO. Lavalier inputs use locking 3.5 mm connectors, and the receiver has a headphone output with level control, plus plug-in power detection to save battery.
The system outputs both analog and digital audio, so it connects to cameras, iOS and Android phones, and computers as a USB microphone. Direct Connect pairs the transmitters with an iOS device over Bluetooth through the RØDE Capture app, without the receiver. Settings and firmware are managed in RØDE Central on desktop or mobile.
Video
Specifikācijas
- Zīmols
- RØDE
- Modelis
- Wireless GO GEN 3
- Kategorija
- Dzīvā skaņa › Bezvadu sistēmas
Wireless
- Channels
- Dual-channel
- Transmission
- Series IV 2.4 GHz digital
- Encryption
- 128-bit
- Range
- Up to 260 m (line of sight)
- Codec
- Proprietary near-zero latency codec
Audio
- On-board recording
- 32-bit float (in each transmitter)
- Gain control
- GainAssist, granular gain adjustment, camera presets
- Built-in microphones
- Same capsules and preamps as Wireless PRO
Inputs
- Lavalier input
- 3.5 mm locking connector
Outputs
- Output types
- Analog and digital
- Headphone output
- High-power, with on-board level control
- USB audio
- Usable as a USB microphone with a computer
Connectivity
- Compatible devices
- Cameras, iOS and Android smartphones, computers
- Direct Connect
- Bluetooth to iOS via RØDE Capture app, no receiver needed
- Series IV compatibility
- RØDECaster Pro II, RØDECaster Duo, RØDECaster Video, Wireless PRO, Interview PRO
Power
- Power saving
- Automatic plug-in power detect
Software
- Companion app
- RØDE Central
- Mobile requirements
- iOS 14 or later; Android 9.0 or later
- Desktop requirements
- macOS 11 or later; Windows 10 Version 1803 or later
Physical
- Display
- LCD
- Colours
- Black, white, plus limited editions (red, orange, green, purple, pink, blue, cobalt, clay, lilac, stone, rose, moss)
- Made in
- Sydney, Australia