PMC8-2
The PMC 8-2 is an active three-way nearfield reference monitor with ATL bass loading and built-in DSP, intended for professional studio monitoring. It can be paired with the PMC 8-2 SUB to form an XBD system with extra bass headroom.
- Active 3-way nearfield monitor with ATL bass loading
- Four 400W Class-D amplifier channels
- Frequency response 25Hz - 25kHz (-3dB)
- Analogue and AES3 digital XLR input, AES3 through output
- SoundAlign network control over RJ45
- Upgradeable to XBD with 8-2 SUB for up to 6dB more headroom
Fotoattēli
8Sludinājumi
Šim modelim vēl nav sludinājumu
Kad kāds pārdos PMC8-2, sludinājumi un pārdošanas vēsture parādīsies šeit.
Pārdot tādu pašuApraksts
The 8-2 uses two 200mm (8") bass drivers, a 55mm (2") soft-dome mid-range and a 27mm (1") soft-dome tweeter. Four Class-D amplifier channels of 400W each drive them. The cabinet uses an Advanced Transmission Line with an effective length of 3m, together with Laminair vents. Frequency response is 25Hz to 25kHz (-3dB), with a maximum continuous SPL of 113dB at 1m and a peak SPL of 125dB at 1m.
A DSP section handles crossover, driver protection, EQ and delay. Adjustments include level trim, a high-pass filter, delay, polarity, LF and HF shelving filters, a 5-band parametric EQ and three user presets plus factory defaults. Settings can be changed from the rear panel or through the browser-based SoundAlign interface, which runs from a built-in web server over Ethernet. Latency is 2.4mS.
The XLR input switches between analogue and AES3 digital (16/24-bit, 18-192kHz), and an XLR AES3 output passes the digital signal on. An expansion card slot is provided for future connectivity upgrades. Adding the 8-2 SUB creates an XBD system with up to 6dB of extra headroom. Optional floor stands are available for both the 8-2 and the 8-2 XBD.
Video
Specifikācijas
- Zīmols
- PMC
- Modelis
- PMC8-2
- Kategorija
- Studija › Studijas monitori
Acoustic
- Type
- Active 3-way nearfield reference monitor with ATL bass loading
- LF driver
- 2 x PMC 200mm (8") studio 8 drivers
- MF driver
- PMC 55mm (2") soft dome mid-range
- HF driver
- PMC 27mm (1") soft dome tweeter
- Effective ATL length
- 3m (9.8ft)
- Frequency response
- 25Hz - 25kHz (-3dB) (@1m full space, on-axis)
- Sensitivity
- +4dBu input signal = 98dB SPL @ 1m
- Max continuous SPL
- 113dB @1m
- Max peak SPL
- 125dB @1m
- Directivity
- H +/-45 degrees, V +/-50 degrees (-6dB off axis @10kHz)
Inputs
- Input
- XLR switchable between analogue and digital AES3
- Analogue max input level
- +20/+24dBu (selectable)
- Analogue input impedance
- 22K ohm
- Digital input
- 16/24-bit AES3, left, right or left + right
- Digital sample rate
- 18 - 192kHz
- Digital input impedance
- 110 ohm
- Expansion card slot
- For future connectivity upgrades
Outputs
- Digital output
- XLR AES3 (fixed 24-bit @ 96kHz)
Connectivity
- Network
- RJ45 for PMC SoundAlign web interface
Amplification and DSP
- Amplifier power
- LF 2 x 400Wrms, MF 1 x 400Wrms, HF 1 x 400Wrms
- Level trim
- +/-10dB
- High-pass filter
- 20 - 200Hz, 12dB/Oct
- Delay
- 0 - 30mS
- Phase
- Normal or inverted
- Shelving filters
- LF & HF, 20Hz - 20kHz, +/- 10dB, Q 0.707
- Parametric EQ
- 5 bands, 20Hz - 20kHz, +/- 10dB
- User presets
- 3 + factory defaults
- Latency
- 2.4mS
Power
- Mains
- 100 - 240VAC auto-switching, 50-60Hz (IEC C14)
- Power consumption (idle)
- 50W
- Power consumption (max)
- 1500W
Physical
- Dimensions (H x W x D)
- 534mm (21") x 551mm (21.7") x 440mm (17.3")
- Weight
- 39kg (86lbs) each