MC X50
Ortofon Vairs netiek pārdots

MC X50

Moving-coil phono cartridge and the top model of Ortofon's MC X Series, with a nude Micro Ridge diamond stylus on a boron cantilever. Aimed at vinyl listeners who want a high-resolution MC cartridge with a half-inch mount.

  • Top model of the Ortofon MC X Series
  • Nude Micro Ridge diamond stylus, r/R 2.5/75 μm
  • Boron cantilever
  • High-purity silver coil wire
  • MIM stainless steel body with honeycomb core
  • 0.4 mV output, 2.0 g tracking force, 8.6 g weight

Fotoattēli

8

Sludinājumi

Šim modelim vēl nav sludinājumu

Kad kāds pārdos MC X50, sludinājumi un pārdošanas vēsture parādīsies šeit.

Pārdot tādu pašu

Apraksts

The MC X50 is the highest-ranked cartridge in the MC X Series. It pairs a nude Micro Ridge diamond stylus, which has a very narrow side radius, with a boron cantilever. This combination is intended to improve high-frequency tracking, lower inner-groove distortion, and give a quick transient response with low distortion.

Inside, the coils are wound with high-purity silver wire and work with a newly developed magnet system that has a one-piece pole cylinder built into a rear magnet yoke. The damping uses rubber compounds developed and produced in-house, and the X50 gets a new rubber suspension with a newly formulated compound made specifically for it. The body is MIM stainless steel with a honeycomb core structure, finished in black.

The cartridge uses a half-inch mount and weighs 8.6 g. Recommended tracking force is 2.0 g, and output voltage is 0.4 mV at 1 kHz, so it needs a phono stage with moving-coil input.

Video

Specifikācijas

Zīmols
Ortofon
Modelis
MC X50
Kategorija
DJ aprīkojums › Galviņas un adatas

Electrical

Output voltage at 1 kHz, 5 cm/sec
0.4 mV
Channel balance at 1 kHz
0.5 dB
Channel separation at 1 kHz
> 28 dB
Internal impedance, DC resistance
6 Ω
Frequency response 20 Hz - 20 kHz
+/-1 dB

Stylus and Cantilever

Stylus type
Nude Micro Ridge diamond
Stylus tip radius
r/R 2.5/75 μm
Cantilever material
Boron
Stylus suspensions
Ortofon exclusive
Compliance, dynamic, lateral
14 μm/mN

Coil System

Coil system
High-purity silver Coil wire
Coil wire material
High-purity silver

Setup

Tracking force, recommended
2.0 grams
Mounting type
Half inch mount

Physical

Cartridge body material
MIM Stainless Steel & Honeycomb Core Structure
Cartridge colour
Black
Cartridge weight
8.6 grams

Dati: ortofon.com; foto: Ortofon product page · atjaunināts 2026-10-10 · Atradi kļūdu? Raksti mums