2M Black
The 2M Black is the top model of Ortofon's 2M moving-magnet cartridge series, fitted with a nude Shibata diamond stylus and an aluminium cantilever. It suits vinyl listeners who want detailed, accurate playback from a standard half-inch mount turntable.
- Moving-magnet cartridge, flagship of the 2M series
- Nude Shibata diamond stylus, r/R 6/50 µm
- Aluminium cantilever
- Output 5 mV at 1 kHz; tracking force 1.5 g recommended
- Recommended load 47 kOhm, 150-300 pF
- Half inch mount; weighs 7.2 g
Fotoattēli
8Sludinājumi
Šim modelim vēl nav sludinājumu
Kad kāds pārdos 2M Black, sludinājumi un pārdošanas vēsture parādīsies šeit.
Pārdot tādu pašuApraksts
The 2M Black is the highest model in Ortofon's 2M series of moving-magnet cartridges. It carries a nude Shibata diamond stylus on an aluminium cantilever. The slim, highly polished stylus profile gives a wide contact area with the groove walls, which is meant to help it follow fine detail, including high-frequency groove information.
The generator uses Ortofon's split pole pin design with silver-plated OFC coil wire in a quad-coil arrangement. The body is made of polymer and aluminum in black. The recommended tracking force is 1.5 g, and the output is 5 mV at 1 kHz, so it works with ordinary phono inputs for moving-magnet cartridges.
The 2M series is made in Denmark and was styled with Møller Jensen Design. The standard 2M version uses a half-inch mount to fit the most common turntables. The series also has Premounted, Verso (bottom mount) and 2MR (low-form tonearms such as Rega) configurations. A user guide and dimensions chart are available from the maker.
Video
Specifikācijas
- Zīmols
- Ortofon
- Modelis
- 2M Black
- Kategorija
- DJ aprīkojums › Galviņas un adatas
Electrical
- Output voltage at 1 kHz, 5cm/sec
- 5 mV
- Channel balance at 1 kHz
- 1 dB
- Channel separation at 1 kHz
- 26 dB
- Frequency response 20 Hz - 20 kHz
- 2 / - 0 dB
- Internal impedance, DC resistance
- 1.2 kOhm
- Internal inductance
- 630 mH
- Recommended load resistance
- 47 kOhm
- Recommended load capacitance
- 150-300 pF
Stylus and tracking
- Stylus type
- Nude Shibata diamond
- Stylus tip radius
- r/R 6/50 µm
- Cantilever material
- Aluminium
- Tracking ability at 315 Hz
- 80 µm
- Compliance, dynamic, lateral
- 22 µm/mN
- Tracking force range
- 1.4-1.7 g (14-17 mN)
- Tracking force, recommended
- 1.5 g (15 mN)
- Tracking angle
- 20°
Construction
- Coil system
- Quad-coils with split pole pins and silver-plated OFC Coil wire
- Coil wire material
- Silver-plated OFC Coil Wire
- Cartridge body material
- Polymer and aluminum
- Cartridge colour
- Black/Black
Physical
- Mounting type
- Half inch mount
- Cartridge weight
- 7.2 g
- Premounted cartridge weight
- 16.7 g