Studio 900 Combo
A 20W two-channel valve combo amp from Marshall's Studio range, based on the JCM900 and built in the UK. It has a 1x12" Celestion speaker, built-in spring reverb and an effects loop, and suits guitarists who want crunch tones at studio or stage volumes.
- 20W valve combo with 5W and <1W attenuation
- Two channels, based on the JCM900
- Celestion G12T-75 12" speaker (16Ω, 75W)
- Built-in spring reverb and effects loop
- DI and compensated DI outputs
- Made in UK, weighs 17.9 kg
Fotoattēli
8Sludinājumi
Šim modelim vēl nav sludinājumu
Kad kāds pārdos Studio 900 Combo, sludinājumi un pārdošanas vēsture parādīsies šeit.
Pārdot tādu pašuApraksts
The Studio 900 Combo is a compact two-channel guitar combo that carries over the sound of the JCM900 in a 20W format. The signal path uses two ECC83 preamp valves and an ECC83 phase splitter, with two 5881 valves in the power stage. The design pairs valve circuitry with solid-state components.
Each channel can be set up with its own settings, so the player can move between a clean sound and crunch sounds. Controls cover gain, EQ and volume, and a spring reverb is built in. A power attenuation switch lowers the output from 20W to 5W or below 1W for quieter playing. An effects loop is also fitted.
The amp has five 1/4" speaker output jacks covering 16Ω, 8Ω and 4Ω loads, plus a DI output and a compensated DI output for recording. The built-in speaker is a Celestion G12T-75 in a black cabinet. The amp is designed, engineered and made in the UK at Marshall's Bletchley factory.
Video
Specifikācijas
- Zīmols
- Marshall
- Modelis
- Studio 900 Combo
- Kategorija
- Ģitāras un basģitāras
General
- Model
- SN20C
- Range
- Studio
- Channels
- 2
- Technology
- Valve
- Colour
- Black
Audio
- Output wattage
- 20W (with power reduction to 5W), <1W
- Reverb
- Built-in spring reverb
- Effects loop
- Built-in
Valves
- Preamp valves
- 2 x ECC83
- Phase splitter
- 1 x ECC83
- Power amp valves
- 2 x 5881
Speaker
- Speaker configuration
- 1 x 12"
- Speaker model
- Celestion G12T-75 (16Ω, 75W)
Outputs
- Speaker outputs
- 5 x 1/4" jack sockets (16Ω load / 8Ω load / 4Ω load)
- DI output
- Yes
- Compensated DI output
- Yes
Physical
- Weight
- 17.9 kg / 39.5 LB
- Width
- 510 mm / 20.1"
- Height
- 460 mm / 18.1"
- Depth
- 255 mm / 10"
- Country of origin
- Designed and engineered in UK. Made in UK.