JVM205 Head
A 50W all-valve guitar amplifier head from Marshall's JVM range, built in the UK. It has two channels with three gain modes, digital reverb and two effects loops, and suits players who run pedals and want programmable control.
- 50W all-valve head with 2 EL34 power valves
- Two channels, three gain modes shown by LED colours
- Switchable master volume for each channel
- Built-in digital reverb with per-channel level
- Two effects loops: one series/parallel, one series
- Programmable footswitch included
Fotoattēli
8Sludinājumi
Šim modelim vēl nav sludinājumu
Kad kāds pārdos JVM205 Head, sludinājumi un pārdošanas vēsture parādīsies šeit.
Pārdot tādu pašuApraksts
The JVM205 Head is a 50W valve amp head with two channels and a multi-mode design offering three gain stages, indicated by green, orange and red LEDs. Each channel has its own gain, treble, middle, bass and reverb controls, with shared presence and resonance controls. A master volume can be switched on for each channel, so solo and rhythm levels can be set separately.
The power section uses two EL34 valves, with four ECC83 preamp valves plus one ECC83 as phase splitter. Digital reverb is built in, and there are two effects loops, one series/parallel and one series. A programmable footswitch is supplied and recalls the mode, master and reverb settings.
The back panel provides five 1/4" speaker outputs for 16Ω, 8Ω and 4Ω loads, an emulated line out on XLR and MIDI In and Thru. The amp is designed, engineered and assembled by hand in the UK, and comes in black.
Video
Specifikācijas
- Zīmols
- Marshall
- Modelis
- JVM205 Head
- Kategorija
- Dzīvā skaņa › Pastiprinātāji
General
- Model
- JVM205H
- Range
- JVM
- Channels
- 2 (Multi)
- Technology
- Valve
- Colour
- Black
Audio
- Output wattage
- 50W
- Effects
- Digital reverb
- Effects loop
- 2, 1 x series parallel, 1 x series
Valves
- Preamp valves
- 4 x ECC83, 1 x ECC83 (phase splitter)
- Power amp valves
- 2 x EL34
Controls
- Controls
- Channel and mode select (button), gain (per channel), treble (per channel), middle (per channel), bass (per channel), reverb (per channel), presence, resonance, master volume select, master volume (switchable for each channel)
Inputs
- Instrument input
- 1 x 1/4" jack
- MIDI
- MIDI In
- Footswitch
- Footswitch input
Outputs
- Speaker outputs
- 5 x 1/4" jack sockets (16Ω load / 8Ω load / 4Ω load)
- Line out
- Emulated Line Out (XLR)
- MIDI Thru
- MIDI Thru
Physical
- Weight
- 17.5 kg / 39 LB
- Width
- 740 mm / 29.1"
- Height
- 310 mm / 12.2"
- Depth
- 215 mm / 8.5"
- Country of origin
- Designed and engineered in UK. Made in UK.
In the box
- Footswitch
- PEDL-91006 included
- Power cable
- Detachable power cable included
- Speaker cable
- Speaker cable included