LINEAR 5 MK2 115 FA
Active 2-way full-range mid/high loudspeaker with a 15" woofer and 1" compression driver in a rotatable 60° x 40° horn. Built for portable PA, stereo systems and flown or clustered setups, including use with LINEAR 5 MK2 subwoofers.
- Active 2-way, 15" woofer + 1" compression driver
- 600 W RMS / 1200 W peak Class D biamped amplifier
- Max. SPL peak 138 dB, 57 Hz - 18 kHz (-6 dB)
- 60° x 40° rotatable constant-directivity horn
- 10-band parametric EQ DSP with MILAN network input
- Flyable with TB-45N / TB-45NQ tilt brackets
Fotoattēli
8Sludinājumi
Šim modelim vēl nav sludinājumu
Kad kāds pārdos LINEAR 5 MK2 115 FA, sludinājumi un pārdošanas vēsture parādīsies šeit.
Pārdot tādu pašuApraksts
The LINEAR 5 MK2 115 FA is an active two-way, bass-reflex loudspeaker with a 15" cone driver and a 1" compression driver on a rotatable constant-directivity horn. It is the FA variant of the LINEAR 5 MK2 range, with a longer horn for greater throw distance and the strongest low-end of the series. A Class D biamped amplifier delivers 600 W RMS (1200 W peak), and the maximum peak SPL is 138 dB.
On-board DSP provides a 10-band parametric EQ, high-pass and low-pass filters, polarity, level, delay, limiter and mute. Presets are Flat, Boost, Low Cut and Remote, and a dedicated filter matched to the LINEAR 5 MK2 subwoofers lets the cabinet work as a system mid/high unit. Settings can be edited in the DSP CONTROL software for Windows and Mac OS.
Connections are an XLR/jack combo input, an XLR link output, a DSP output, an Ethercon network input with MILAN digital audio transmission, and an IEC mains inlet with V-lock. The hybrid birch plywood/MDF cabinet has two MultiGrip handles, a DuoTilt pole mount and M8 rigging points. Optional TB-45N or TB-45NQ tilt brackets allow flying, and the horn dispersion suits horizontal and vertical clustering.
Video
Specifikācijas
- Zīmols
- HK Audio
- Modelis
- LINEAR 5 MK2 115 FA
- Kategorija
- Dzīvā skaņa › PA skaļruņi
Audio
- Concept
- Active 2-way loudspeaker
- Cabinet principle
- Bass reflex
- Max. SPL average
- 130 dB
- Max. SPL peak
- 138 dB
- Crossover frequency
- 1.6 kHz
- Frequency range -6 dB
- 57 Hz - 18 kHz
- Frequency range -10 dB
- 54 Hz - 19 kHz
- Dispersion angle -6 dB (H x V)
- 60° x 40°, rotatable
Drivers
- Mid/high frequency
- 1 x 15" cone speaker, 3" voice coil
- High frequency
- 1 x 1" compression driver, 1.7" voice coil
- Horn
- Constant directivity horn, rotatable
Inputs
- Analog input
- 1 x XLR/jack combo symm.
- Network input
- 1 x Ethercon RJ45
- Maximum input level
- +20 dBu
Outputs
- Analog output
- 1 x XLR symm.
- DSP output
- 1 x XLR symm.
Electronics
- Preamplifier
- DSP preamplifier
- Power amplifier
- Class D-Biamped
- Power amplifier output RMS
- 600 W
- Power amplifier output peak
- 1200 W
- Speaker protection
- RMS-/Peak-Limiter
- Sample rate
- 48 kHz
- Latency
- under 2 ms
- Filter presets
- Flat, Boost, Low Cut, Remote
Connectivity
- Digital audio transmission
- MILAN
- Remote software
- HK Audio DSP CONTROL (Windows, Mac OS)
Power
- Power supply
- 1 x IEC connector with V-lock safety system, 100-240 V
- Power consumption
- 1 A / 100-240 V nominal according to EN 62368-1
Physical
- Rigging / pole mount
- HK Audio DuoTilt 3°/7°, monitor angle: 31°, 3 x rigging point M8
- Carrying handles
- 2 x HK Audio MultiGrip
- Cabinet material
- Hybrid (Birch plywood/MDF)
- Cabinet surface
- Acrylic enamel
- Color
- Jet black (RAL 9005)
- Front grille
- Steel front grille with anticorrosive coating and backed acoustic foam
- Dimensions (W x H x D)
- 44.8 x 70.7 x 44.75 cm (17-5/8 x 27-27/32 x 17-5/8 inch)
- Weight
- 30.2 kg (66.6 lbs)