LINEAR 5 LTS
The LINEAR 5 LTS is a passive 2-way mid/high cabinet that gives long-throw coverage (30 m and beyond) in a compact box. It suits small to medium live and corporate events and installation projects, where fewer cabinets and faster rigging are wanted.
- Passive 2-way mid/high unit, bass reflex
- 600 W RMS / 1200 W program, 8 ohms
- Max. SPL peak 138 dB
- Dispersion 60° x +5°/-25°
- NL4 Speakon input and parallel output
- 26.4 kg, 5 x M8 rigging points
Fotoattēli
8Sludinājumi
Šim modelim vēl nav sludinājumu
Kad kāds pārdos LINEAR 5 LTS, sludinājumi un pārdošanas vēsture parādīsies šeit.
Pārdot tādu pašuApraksts
The LINEAR 5 LTS is a passive two-way mid/high unit in a bass-reflex cabinet. It combines three 8" cone speakers with a 1" compression driver on an MCT horn, and splits the signal at 1.7 kHz. It is rated at 600 W RMS (1200 W program) into 8 ohms and reaches a peak SPL of 138 dB. Horizontal dispersion is 60°, with a vertical pattern of +5°/-25°.
The cabinet is built to project the full frequency range over long distances that were previously the job of larger line arrays. Using fewer cabinets can save transport space, and the rigging and ground-stacking hardware is meant to make setup quicker. It has HK Audio MonoTilt 0° and five M8 rigging points, plus two MultiGrip carrying handles. The housing is hybrid birch plywood and MDF in jet black, with a steel grille backed by acoustic foam.
Connection is by NL4 Speakon, with one input and one parallel output, and the pin assignment is switchable. DSP presets and filter sheets are available for Lab.gruppen IPX and IPD series amplifiers, Lake processors, Ashly and DSM 2060. A range of accessories is offered, including tilt units, pole mounts, covers and a rain cover set.
Video
Specifikācijas
- Zīmols
- HK Audio
- Modelis
- LINEAR 5 LTS
- Kategorija
- Dzīvā skaņa › PA skaļruņi
Audio
- Concept
- Passive 2-way mid/high unit
- Cabinet principle
- Bass reflex
- Power handling RMS
- 600 W
- Power handling program
- 1200 W
- Nominal impedance
- 8 ohms
- Max. SPL average
- 133 dB
- Max. SPL peak
- 138 dB
- Sensitivity 1 W/1 m
- 110 dB
- Crossover frequency
- 1.7 kHz
- Frequency range -6 dB
- 108 Hz - 14 kHz
- Frequency range -10 dB
- 100 Hz - 20 kHz
- Dispersion angle -6 dB (H x V)
- 60° x +5°/-25°
Components
- Mid/high frequency
- 3 x 8" cone speaker, 2" voice coil
- High frequency
- 1 x 1" compression driver, 1.75" voice coil
- Crossover
- High pass: 12 dB/oct., Low pass: 12 dB/oct.
- High frequency protection
- PTC circuit
- Horn
- MCT-Horn
Connectivity
- Input
- 1 x NL4 Speakon
- Output/parallel output
- 1 x NL4 Speakon
- Pin assignment
- 1+/-, 2+/-, switchable
Physical
- Cabinet features/rigging
- HK Audio MonoTilt 0°, 5 x rigging point M8
- Carrying handles
- 2 x HK Audio MultiGrip
- Cabinet material
- Hybrid (Birch plywood/MDF)
- Cabinet surface
- Water enamel/1K
- Color
- Jet black (RAL 9005)
- Front grille
- Steel front grille, backed with acoustic foam
- Dimensions (W x H x D)
- 44 x 68 x 46.1 cm (17-5/16 x 26-25/32 x 18-5/32 inch)
- Weight
- 26.4 kg (58.2 lbs)
Software
- Amp presets
- Lab.gruppen IPX Series, IPD Series, Lake
- Filter sheets
- Lab.Gruppen IPX Series, IPD Series (limiter settings incl.)